Sewage treatment is a livelihood project, it will play an important role in improving the water quality of Fen River and the ecological environment of Fen River basin. Whether in rural aeration head sewage or industrial sewage treatment is widely used, but many customers will encounter the diameter problem of aeration head aeration pipe, fear of choosing the assembly to increase the cost, choose small fear of the effect.
Today, aeration head manufacturers introduce the choice of aeration head pipe diameter.
1. The consequences of underreporting.
Aeration head pipe adopts circular loop layout. Generally, there are more aeration head pipe and branch pipe with different diameter C, and the aeration injection pipe is larger than the branch pipe. Generally 150 sets. The diameter of the aerator head is 100, and the diameter of the branch pipe is 50. But also according to the structure of the civil construction pool, the specification model of the aerator head, the arrangement method, the size of the aerator pipe should be integrated to choose the position of the air inlet. If the diameter of the aeration head pipe is too small and the fan air volume is large, it will lead to the rupture of the aeration head for a long time. If you want the air volume to be 100 cubic meters, the pipe can only output 10 cubic meters, the consequences can be imagined.
2. What if the caliber is too large?
Too large diameter of aeration head will increase the cost, but will not affect the aeration effect. Choosing pipes that are too big is a waste of money, which means making a fuss.
The manufacturer of aeration head is a new type of microporous aeration equipment, used for biochemical treatment of municipal sewage. Microporous aerator is not only effective, but also highlights the characteristics of environmental protection. It is different from some chemical treatments and can be contaminated. Some aerator manufacturers add check valves and some do not. What's the difference with or without a check valve?
Diaphragm aeration head return valve.
First add check valve in aerator head, can prevent sludge backfilling, so as not to affect the use of aerator head. The aeration tray uses physical methods to treat harmful gases or substances. Putting oxygen into the air and then injecting oxygen into the water to form an aerobic cycle will not only damage the environment, but also have the effect of reducing harmful substances in the sewage and diaphragm aerator based on diversity. The complexity of pollutants in sewage can be treated by stratification to achieve discharge standards. With the development of the city and work. With the improvement of the level of industrialization, the sewage that cannot meet the discharge standard is imperative. In order to develop society, the government can not completely shut down these enterprises and industries, so to minimize the level of water pollution has become a primary consideration, there are certain requirements for the treatment of aerator wastewater.
Two, aeration head without check valve.
What happens to the aerator without the check valve? If the sludge at the bottom of the tank is more in the application process, if the sludge enters the aeration head, it will cause blockage. Affect the use of aerator. In addition, disk type aeration head can increase the air content of water, prevent water rancid, the formation of a certain stirring effect on water, prevent water material sedimentation. In the process of decompression, bubbles form on the surface of oil impurities, air floating, separation and removal.
